Therm-O-Door Commercial Overhead Doors

Therm-O-Door Overhead Door

Steel-Craft’s Therm-O-Door Commercial Overhead doors are manufactured from top-quality, Canadian-made steel, and are designed from the inside out to ensure maximum strength.

  • Therm-O-Door Overhead doors feature a patented mechanical interlock design and heavy-duty hardware offering industry-leading durability and excellent protection against break-ins.
  • Therm-O-Door Overhead doors are corrosion-resistant and feature treatments of a zinc base coating and two polyester topcoats.
  • Exteriors are paint-able, won’t fade, and are easy to clean.
  • TD 138 model comes with a 1-3/8″ layer of polyurethane insulation, which gives an R-value of 12.60, twice the efficiency of competitors’ polystyrene panels.
  • TD 134 model comes with a 1-3/4″ layer of polyurethane insulation, which gives an R-value of 16.04, twice the efficiency of competitors’ polystyrene panels.

Therm-O-Door Colours

Available in TD 138

Available in TD 138

Available in TD 134

Available in TD 134
Note: The accuracy of the colours displayed may vary depending on the settings of your monitor.
To obtain an exact colour reference, please contact our office for colour samples.

Thermo-O-Door Features

  • Flexible top seal keeps cold and debris out
  • Section weather seals keep wind and cold out
  • PVC retainer aids in door rigidity
  • Top-quality Canadian galvanized steel is durable and rust resistance
  • Two-coat exterior polyester paint finish on inner and outer skin is extremely durable
  • Therm-O-Break design reduces cold/heat/moisture conductivity
  • Mechanically interlocked front and back skins increase strength
  • TD 134 — CFC- and HCFC-free polyurethane core bonds to steel skins and nets an R-value of 16.04 in just 1-3/4″ of thickness
  • TD 138 — CFC- and HCFC-free polyurethane core bonds to steel skins and nets an R-value of 12.60 in just 1-3/8″ of thickness
  • Continuous steel overlap secures hardware attachments
  • Flexible floor seal conforms to minor irregularities to keep out cold and debris
  • Insulated windows feature sealed lites and high-impact polymer frames
  • Heavy-duty rollers and hardware are durable and make for easy installation

TD 138 Optional Features

TD 138 Optional Features

More Options

Therm-O-Door TD-138 offers a selection of customized options that will enable you to meet virtually any application requirement.

Door Face

Optional upgrades to components that are connected to the door face.

  • Graduated End Hinge – available in increased gauge.
  • Track Rollers – available in a variety of formats to meet your specifications.
  • Low Lift Hardware
  • Locks – 2 point interior, 2 point exterior.
  • Lift Handle – 3 options available.
  • Vision Lite Windows – sealed glass: 23″x7″; 24″x12″; 34″x16″; consult your dealer on the wide variety of glass options.
  • Exhaust Ports – available in various sizes.
  • Strutting – to increase wind load capacity.
  • Specialty High Moisture Area Conversions

Guide

Optional upgrades to components that are related to the door guide. All lifts are available in 2″ or 3″ track.

  • High Lift – track and hardware that causes the door to rise vertically some distance above the top of the door opening before it levels out into a horizontal position. Available to meet a variety of height specifications.
  • Vertical Lift – track and hardware that causes the door to open vertically where no horizontal tracks are required. Available to meet all height specifications.
  • Low Lift Double Track – low headroom accessories which enable a door system to operate in minimal headroom conditions. Available to meet a variety of low headroom specifications.
  • Full Angle Mount – available in Continuous and Reverse (1″ overlap).

Lift

Optional upgrades to components that are related to the door lift.

  • Torsion Spring Assembly – extensive cycle options are available to meet all specifications.
  • Torsion Shaft – available in 1″ solid where 1″ tube is specified.
  • End Bracket – 2-bolt flange bearing, available in 1″.

TD 134 Optional Features

TD 134 Optional Features

Therm-O-Dor TD-134 offers a selection of customized options that will enable you to meet virtually any application requirement.

Door Face

Optional upgrades to components that are connected to the door face.

  • Graduated End Hinge – available in increased gauge.
  • Graduated Double End Hinge – available in increased gauge.
  • Track Rollers – available in a variety of formats to meet your specifications.
  • Top Fixtures – available in increased gauge.
  • Low Lift Hardware
  • Bottom Corner Bracket – available in increased gauge.
  • Failsafe Bottom Corner Bracket
  • Locks – 2 point interior, 2 point exterior.
  • Lift Handle – 3 options available.
  • Vision Lite Windows – sealed glass: 23″x7″; 24″x12″; 34″x16″; consult your dealer on the wide variety of glass options.
  • Aluminum – available in full view section; consult your dealer about insert options (glass, polycarbonate – double or triple wall).
  • Pass Door
  • Exhaust Ports – available in various sizes.
  • Strutting – to increase wind load capacity.
  • Aluminum L Retainer
  • Specialty High Moisture Area Conversions
  • Increased Gauge Section Face

Guide

Optional upgrades to components that are related to the door guide. All lifts are available in 2″ or 3″ track.

  • High Lift – track and hardware that causes the door to rise vertically some distance above the top of the door opening before it levels out into a horizontal position. Available to meet a variety of height specifications.
  • Vertical Lift – track and hardware that causes the door to open vertically where no horizontal tracks are required. Available to meet all height specifications.
  • Low Lift Double Track – low headroom accessories which enable a door system to operate in minimal headroom conditions. Available to meet a variety of low headroom specifications.
  • Moveable Center Posts
  • Full Angle Mount – available in Continuous and Reverse (1″ overlap).

Lift

Optional upgrades to components that are related to the door lift.

  • Torsion Spring Assembly – extensive cycle options are available to meet all specifications.
  • Torsion Shaft – available in 1″ solid where 1″ tube is specified.
  • 1-1/4″ Solid Shaft
  • End Bracket – 2-bolt flange bearing, available in 1″ and 1-1/4″.

Therm-O-Door Brochure

For more information on the Therm-O-Door Commercial Overhead door, download our FREE brochure below:

Therm-O-Door Brochure
100% Canadian Made

Therm-O-Door Photo

Therm-O-Door Photo
Scroll to Top