Therm-O-Dor Overhead Doors
Steel-Craft’s Therm-O-Dor overhead doors are manufactured from top-quality, Canadian-made steel, and are designed from the inside out to ensure maximum strength.
- Doors feature a patented mechanical interlock design and heavy-duty hardware offering industry-leading durability and excellent protection against break-ins.
- Therm-O-Dor overhead doors are corrosion-resistant and feature treatments of a zinc base coating and two polyester topcoats.
- Exteriors are paintable, won’t fade, and are easy to clean.
- The TD 138 model comes with a 1-3/8" layer of polyurethane insulation, which gives an R-value of 12.60, twice the efficiency of competitors’ polystyrene panels.
- The TD 134 model comes with a 1-3/4" layer of polyurethane insulation, which gives an R-value of 16.04, twice the efficiency of competitors’ polystyrene panels.
Features
Thermo-O-Dor Features
- Flexible top seal keeps cold and debris out
- Section weather seals keep wind and cold out
- PVC retainer aids in door rigidity
- Top-quality Canadian galvanized steel is durable and rust resistance
- Two-coat exterior polyester paint finish on inner and outer skin is extremely durable
- Therm-O-Break design reduces cold/heat/moisture conductivity
- Mechanically interlocked front and back skins increase strength
- TD 134 — CFC- and HCFC-free polyurethane core bonds to steel skins and nets an R-value of 16.04 in just 1-3/4" of thickness
- TD 138 — CFC- and HCFC-free polyurethane core bonds to steel skins and nets an R-value of 12.60 in just 1-3/8" of thickness
- Continuous steel overlap secures hardware attachments
- Flexible floor seal conforms to minor irregularities to keep out cold and debris
- Insulated windows feature sealed lites and high-impact polymer frames
- Heavy-duty rollers and hardware are durable and make for easy installation
TD 138 Optional Features
TD 138 Optional Features
More Options
Therm-O-Dor TD-138 offers a selection of customized options that will enable you to meet virtually any application requirement.
Door Face
Optional upgrades to components that are connected to the door face.
- Graduated End Hinge - available in increased gauge.
- Track Rollers - available in a variety of formats to meet your specifications.
- Low Lift Hardware
- Locks - 2 point interior, 2 point exterior.
- Lift Handle - 3 options available.
- Vision Lite Windows - sealed glass: 23"x7"; 24"x12"; 34"x16"; consult your dealer on the wide variety of glass options.
- Exhaust Ports - available in various sizes.
- Strutting - to increase wind load capacity.
- Specialty High Moisture Area Conversions
Guide
Optional upgrades to components that are related to the door guide. All lifts are available in 2" or 3" track.
- High Lift - track and hardware that causes the door to rise vertically some distance above the top of the door opening before it levels out into a horizontal position. Available to meet a variety of height specifications.
- Vertical Lift - track and hardware that causes the door to open vertically where no horizontal tracks are required. Available to meet all height specifications.
- Low Lift Double Track - low headroom accessories which enable a door system to operate in minimal headroom conditions. Available to meet a variety of low headroom specifications.
- Full Angle Mount - available in Continuous and Reverse (1" overlap).
Lift
Optional upgrades to components that are related to the door lift.
- Torsion Spring Assembly - extensive cycle options are available to meet all specifications.
- Torsion Shaft - available in 1" solid where 1" tube is specified.
- End Bracket - 2-bolt flange bearing, available in 1".
TD 134 Optional Features
TD 134 Optional Features
Therm-O-Dor TD-134 offers a selection of customized options that will enable you to meet virtually any application requirement.
Door Face
Optional upgrades to components that are connected to the door face.
- Graduated End Hinge - available in increased gauge.
- Graduated Double End Hinge - available in increased gauge.
- Track Rollers - available in a variety of formats to meet your specifications.
- Top Fixtures - available in increased gauge.
- Low Lift Hardware
- Bottom Corner Bracket - available in increased gauge.
- Failsafe Bottom Corner Bracket
- Locks - 2 point interior, 2 point exterior.
- Lift Handle - 3 options available.
- Vision Lite Windows - sealed glass: 23"x7"; 24"x12"; 34"x16"; consult your dealer on the wide variety of glass options.
- Aluminum - available in full view section; consult your dealer about insert options (glass, polycarbonate - double or triple wall).
- Pass Door
- Exhaust Ports - available in various sizes.
- Strutting - to increase wind load capacity.
- Aluminum L Retainer
- Specialty High Moisture Area Conversions
- Increased Gauge Section Face
Guide
Optional upgrades to components that are related to the door guide. All lifts are available in 2" or 3" track.
- High Lift - track and hardware that causes the door to rise vertically some distance above the top of the door opening before it levels out into a horizontal position. Available to meet a variety of height specifications.
- Vertical Lift - track and hardware that causes the door to open vertically where no horizontal tracks are required. Available to meet all height specifications.
- Low Lift Double Track - low headroom accessories which enable a door system to operate in minimal headroom conditions. Available to meet a variety of low headroom specifications.
- Moveable Center Posts
- Full Angle Mount - available in Continuous and Reverse (1" overlap).
Lift
Optional upgrades to components that are related to the door lift.
- Torsion Spring Assembly - extensive cycle options are available to meet all specifications.
- Torsion Shaft - available in 1" solid where 1" tube is specified.
- 1-1/4" Solid Shaft
- End Bracket - 2-bolt flange bearing, available in 1" and 1-1/4".